Observe the following warnings and safety notes to ensure a smooth installation,
operation, and maintenance of FaceVACS-Entry:
![[Caution]](common/images/admon/caution.png) | |
|---|
Risk of injury due to broken glass If the glass cover breaks, do not touch the broken glass. Wear protective gloves and use suitable tools to clear away the
glass.
|
| |
|---|
Risk of finger contusion when operating without a back
cover |
| |
|---|
Risk of injury due to screw sticking out of the
chassis |
![[Note]](common/images/admon/note.png) | |
|---|
Damage of optical and electrical parts due to
humidity Only operate the P2 panel indoors. Keep humidity in the installation and operating environment below
80 % maximum. Do not operate the panel in temperatures below 10°C. Do not store the panel in temperatures below 5°C.
|
| |
|---|
Poor performance or damage of the P2 panel due to
overheating Only operate the P2 panel indoors. Do not operate the panel in temperatures exceeding 35°C. Do not store the panel in temperatures exceeding 60°C. Keep vents free. Make sure the operating environment is well ventilated.
|
| |
|---|
Poor image quality due to dust, sweat, grease, or foreign
matter between the glass cover and the camera Do not operate the Panel if the front or back cover have been removed from the chassis. Keep the operating environment free of dust. Clean the glass cover regularly.
|
